Safety

Here are some information about a number of security topics.

Please contact us if you have any further questions regarding safety.

Safety Equipment

Safety trip bar

The safety trip bar is mounted under the outer edge of the platform and immediately stops the lowering movement if activated. The safety trip bar ensures that there are no accidents with clamping while using the lifting table.

Service lock

Staying under the platform is prohibited unless the lift table is mechanically locked. All our lifting tables are fitted with service locks as standard. The service locks holds the table at service height, so that service and repairs can be carried out safely under the platform.

Solenoid valve

All TRANSLYFT lifting tables are mounted with a solenoid valve directly on the cylinder. The solenoid valve blocks the oil and causes the platform to stop in case of hydraulic system failure.

Non-slip surface

All lifting tables where individuals need to move must be non-slip. To secure your employees when they move on the lifting table, you can choose different non-slip surfaces for your lifting table. Among the options are the tear drop plate, rubber mat or non-slip-surface-finish which all protects your employees and reduce the risk of fall injuries.

All our lifting tables are CE marked and a CE declaration is sent to you with the manual.

EN 1570

All the TRANSLYFT lifting tables are manufactures according to EN 1570, which is the safety standard for lifting tables. This European Standard specifies the safety requirements for lifting tables for lifting/lowering goods with or without operators.

ATEX

In recent years, there has been a focus on explosion-proof equipment for use in ATEX zones. TRANSLYFT is highly advanced in developing equipment that meet the requirements for ATEX and is a certified manufacturer of ATEX approved equipment. We ensure that our lifting tables and lifts comply with all applicable safety and occupational safety regulations.