Loading bay

TYPE: Platform

Specification range See Technical specifications for details

Capacity:	500 - 6000 kg
Travel:	550 - 2000 mm
Closed height:	160 - 550 mm
Length:	900 - 5000 mm
Width:	650- 3000 mm

Surface treatment

	Galvanized
	Stainless
	Painted

Get a Quote

Available in ATEX

Better Levelling

Increased lifting capacity

Technical specifications

TRANSLYFT standard program

Type	Capacity (kg)	Travel (mm)	Closed height (mm)	Total raised height (mm)	Length (mm)	Width (mm)	Lifting time (sec)	Motor (kW)	Weight (kg)
TM 1500	1500	1100	230	1330	1700	900	27	0.75	315
TT 3000 R	3000	1600	350	1950	2500	2000	35	2.2	950
TS 2000	2000	1500	250	1750	2200	1200	35	2.2	580
TP 6000	6000	2000	500	2500	3100	1500	75	4	1600

A TRANSLYFT loading bay can be described as a platform equalizing the height difference between an unloading/loading vehicle and the warehouse floor. The loading bays are designed and equipped to handle large loads.

The loading bay is built for heavy loads and allows for fast loading and unloading of the goods. The entire delivery of goods can be loaded or unloaded in a few operations which saves a great deal of time.

Loading bays are suitable for e.g:

Loading and unloading trucks or containers
For a difference in levels in warehouses, stores, basements, staircases etc.
Handling goods and pallets
Multi-height vehicle docking
Roll cage lifting
Buildings without raised docks

Our loading bays can be manufactured in ATEX, Hygienic Design, galvanized steel, stainless steel and painted steel.

Show moreShow less

Get data sheet for loading bays

Data sheet

Different loading bays

In dock loading bay for unloading trucks

Where to use a loading bay

Open yards, a bank, a dock, a warehouse and any other facilities receiving or distributing are all possible locations where a loading bay could be useful.

The potential use includes loading and unloading trucks or containers, handling goods and pallets, multi-height vehicle docking, roll cage as well as handling any delivery related activities by various delivery sites, buildings without raised docks, basements, staircases and warehouses. Suitable for any difference in levels, supports any vehicle size from a small van to a big lorry which is why the loading bay is manufactured to your specific demands.

Loading bay safety

A lot of accidents happen each year during the loading and the unloading of lorries. A bridge plate or a docking station only fulfil the purpose of connecting the levels without assuring any safety from the sides. This leaves the operator exposed to a potential danger. Workers could fall resulting in minor to heavy injuries or even death .

That is why a loading bay is a much safer solution because it can be equipped with railings on both sides. If a bridge plate is needed to supplement the lack of one in the vehicle delivering goods, we can add gates that open to secure the sides of the bridge plate enabling a smooth and seamless process.

Having gates at both the front and the back of the loading bay allows easy access and flow of transported goods.

Forklifts, pallet lifters, roll cages and any other load carriers may be used safely as the loading bay has enough nominal load to support it.

Want to hear more about how we can secure your employees with a loading bay? Call us at 01 893 4994 or fill out the box below and we will contact you.

Get a quote

Case

Translyft loading bays also help optimise time resources when performing loading and unloading activities on site. It cuts down on numbers of operations necessary to complete the task. As a result of shortened dispatch time the vehicle downtime is also reduced resulting in optimized productivity level.

Our customers have already experienced the advantages of the loading bay, as you can read in the case below. The advised loading bay solution helped them to reduce the amount of processes needed to load and unload each of the containers arriving or leaving their site. Their accident rate also dropped considerably.

Loading bay lift case

Securing the scissor

As all our products, the loading bay is supplied with all the necessary safety equipment such as safety trip bar to stop the lowering of the table when activated, hence preventing body parts from being trapped.

Different accessories such as chain mesh, roller blinds or bellow guards can be installed to protect the travel zone from unnecessary contact by restricting the possible access between the lowering machine and a person as well as prevent any kind of garbage from falling inside the pit.

It creates a restricted, safe working environment where the design itself combined with all the safety features prevent risk exposure to the greatest extend possible.

The product complies with all the safety regulations included in the EN 1570 standard regulation regarding lifting tables.

Chain mesh

Roller blinds

Bellow guards

Customise your own loading bay

The TRANSLYFT loading bay is a bespoke solution that is built with the safety equipment needed to meet your specific needs and requirements. Whether your business is in need of a solution manufactured in stainless steel or Hygienic Design, especially when working in the medicine or food industry, or in galvanized steel, which is the most durable surface treatment for loading bays mounted outside, or a painted steel version all of these options are available upon your request.

Your loading bay can also be made in ATEX , which is an EU directive regarding hazardous products, explosive atmospheres and sites tackling explosive materials such as printing industries, chemical plants, woodworking areas, etc.

Want more information on our loading bay solutions? Contact our sales team at 01 893 4994 or via the button to your right to get the best advice.

Get a quote

Ease the work and increase efficiency

Lifting tables have been invented to ease physical work for employees, avoid injuries due to overload while increasing efficiency. Here you can read more about back pain, lost working days and ergonomics:

White paper on ergonomics

Service and repair

In addition to our standard 12 month parts and labour warranty we offer 3 after-sales service packages anywhere in Ireland.

Spareparts

TRANSLYFT can deliver spareparts to all our lifting tables.

Whether it is a cylinder, oil or wheel that needs to be changed, we have it in stock so we can send it to you quickly. Write to our mail or contact us at tel. +45 9886 4900

different spareparts for scissor lift tables

Bespoke solutions

Did you not find a product that fit your exact needs? TRANSLYFT are experts in both small and large adjustments of our products so please do not hesitate to give us a call and hear more.

Surface Treatments

TRANSLYFT can manufacture most products in stainless steel, galvanized steel and painted. Read more about the three surface treatments here

Surface treatments