Aftersales FAQ
Troubleshooting your lift
We have listed some of the more common aftersales issue and hope that the list will help you to find the solution for your lifting table.
Under each headline there are several suggestions for a solution.
sales@translyft.com
+45 98 86 49 00
- Lifts in stock
- Lifting tables
Lifting tables
Single scissor lifting tables
Double & triple scissor lift tables
Horizontal lifting tables
Low profile lifting tables
Silverline budget lifting tables
Pallet lifters
Pallet lifters
Stainless steel pallet lifter
Stainless steel lifting tables
Find the right stainless steel solution
Single scissor lifting tables
Double & triple scissor lift tables
Horizontal lifting tables
Low profile lifting tables
Smoke trolley & Roll cage lifter
Hygienic Design
Accessories
Tilting table
Turntable
Weighing table
Mobile lifters
Lifting trolley
Mobile lifters
Linear actuated lifting table
Swingloader
ATEX
Customized solutions
Application
Work platform
Scissor goods lift
Loading bay
Materials lift
Integrated lifts
Conveyor lift
Stage lifts
Service tables
Work positioners
Mobile elevated work platform
Material handling equipment
Cases & insights
Do you require assistance?We are committed to finding the right solution for your needs. We advise throughout the entire process from consultancy, design and product development to production and finally service.
Jakob Overgaard
Sales, Southern Europe, Africa, North and South America
Tel.: +45 9647 4626
Mail: jo@translyft.com
Mads Lyebalk
Sales, Central & Eastern Europe, Middle East, Asia, & Australia
Tel.: +45 9647 4639
Mail.: mly@translyft.com
- Goods and accessibility lifts
Goods lift
Scissor goods lift
Goods lift with attendant
Goods lift without attendant
Accessibility lift
Stair lift
Vertical platform wheelchair lift
Car lift
Cases & insights
Do you require assistance?We are committed to finding the right solution for your needs. We advise throughout the entire process from consultancy, design and product development to production and finally service.
Mads Lyebalk
Sales, Central & Eastern Europe, Middle East, Asia, & Australia
Tel.: +45 9647 4639
Mail.: mly@translyft.com
- Aftersales
- Lifts in stock
- Lifting tables
- Goods and accessibility lifts
- Goods lift
- Scissor goods lift
- Goods lift with attendant
- Goods lift with attendant up to 2000 kg
- Goods lift with attendant up to 5000 kg
- Goods lift with attendant up to 6000 kg
- Goods lift without attendant
- Goods lift - 500 kg capacity
- Goods lift - 2000 kg capacity
- Goods lift - 5000 kg capacity
- Goods lift - 3000 kg capacity
- Goods lift - 10.000 kg capacity
- Accessibility lift
- Car lift
- Cases & insights
- Aftersales
- About us
- The motor will not start
-
This can be caused by:
- - The switch for the isolator being in the OFF position. Fix it by activating the switch by turning it ON.
- - No power supply. Fix it by checking the power source.
- - The emergency stop being activated. Release it by turning the button clockwise.
- - Circuit breakers on the primary or secondary lines are turned on. Fix it by verifying the cause, then restarting.
- - The switch for the isolator being in the OFF position. Fix it by activating the switch by turning it ON.
-
- The lifting table does not lower
-
This can be caused by:
- - The safety trip bar has been activated - Get rid of any stuck obstacles. Recet by pressing the up briefly and then the downward button again.
- - The emergency stop is activated. - Release it by turning the button clockwise.
- - Faulty electrical wiring. -Verify the connections.
- - Primary or secondary line fuses being activated. - Verify the cause and then restore to default settings.
- - The pressure relief valve remaining closed. Inspect the electrical circuit. It is possible that the valve cartridge or solenoid coil may need replacement.
-
- The lift is not moving
-
This can be caused by:
- - The motor rotating in the wrong direction. Fix it by changing the two fases (Switch of the isolator before beginning this proces)
- - The safety valve opens. This means that there is overload on the table. Remove weight from the lift.
- - Electrical connection error. Fix it by checking the connection.
- - Overload on the lift table. Remove excess weight from the lift table.
- - An inadequate quantity of oil. Just add oil until the desired level is reached.
- - The motor rotating in the wrong direction. Fix it by changing the two fases (Switch of the isolator before beginning this proces)
-
- Lift table lowers without pushing any button
-
This can be caused by:
- - The oil volume falling as a result of oil cooling. – this is perfectly normal. However, if this is inconvenient for you call us at +45 9886 4900 and we can find a solution for you.
- - Contamination in the hydraulic system. You need to follow three steps to fix this: Run the lift many times to clear any impurities from the valve seating. Dismantle the lowering valve, inspect the valve cartridges, and clean them. Replace the lowering and check valve cartridges and replace the oil with fresh oil.
-
- Faster or slower lifting and lowering speed
-
This can be caused by:
- - The flow control valve being incorrectly adjusted. - Modify the flow control valve. Caution! High speed might lead to greater risk for unstable products.
-
- Shaky movements when lifting and lowering
-
This can be caused by:
- - Faulty electrical wiring. -Fix it by verifying the connections.
- - The emergency stop is activated. - Release it by turning the button clockwise.
- - Air being present in the hydraulic system. - Inspect the oil level. Operate the table regurlarly at 5-minute intervals. When the table is at its lowest position, push the Down button for 30 seconds.
-