enquiries@translyft.com +44 0870 904 7775

Work platform

TYPE: Work table

Specification range See Technical specifications for details

Capacity:	500 - 2000 kg
Travel:	830 - 2400 mm
Closed height:	180 - 550 mm
Length:	1800 - 10.000 mm
Width:	1000 - 3000 mm

Surface treatment

	Galvanized
	Stainless
	Painted

Get a Quote

Available in ATEX

Available in Hygienic Design

Better Levelling

Technical specifications

TRANSLYFT standard program

Type	Capacity (kg)	Travel (mm)	Closed height (mm)	Total raised height (mm)	Length (mm)	Width (mm)	Lifting time (sec)	Motor (kW)	Weight (kg)
TLH 2000 NOTE: All models can be equipped to become a working platform. These are the three most common models.	2000	830	180	1010	2600	800	36	0.75	325
TLD 1000 NOTE: All models can be equipped to become a working platform. These are the three most common models.	1000	1600	375	1975	1300	800	30	0.75	310
TLT 1500 NOTE: All models can be equipped to become a working platform. These are the three most common models.	1500	2400	550	2950	1300	900	30	2.2	495

An ergonomic and stable Work platform ensures both safety and efficiency. The platform is designed to lift and lower people, their tools and materials. Access difficult spots easily and make working conditions better.

You can customize the table with many smart features:

Retractable handrails
Toolbar side platform,
Possibility to connect power and compressed air directly from platform
Stairs to easier to get up and down the platform

Additional you can add other safety accessories such as rubber mat, tear drop plate or non slip paint finish.

Our work platforms can be manufactured in ATEX, Hygienic Design, galvanized steel, stainless steel and painted steel.

Show moreShow less

Get data sheet for work platforms

Data sheet

What is a Work Platform?

A Work platform is an ergonomic and stable lifting device that ensures both safety and efficiency while working in the height. The platform is designed to lift and lower people, materials, and their tools. A work platform makes it easy to access challenging locations easily and improve the working conditions.

A standard work platform is usually fastened to a warehouse floor, ensuring that it stays in the desired position. Often, the work platform us at part of a work flow where it must be placed in a certain spot to allow a seamless operation. However, it is also possible to make the work platform moveable adding castors or a mobility kit.

Translyft work platform in building firm

Safe and trusted equipment

If you are to elevate objects or persons or need trusted equipment for carrying work on heights it is necessary to supply your workplace with a work platform. At Translyft we offer a variety of different work platforms, based on our well-known scissor mechanism. We are aware that every workstation is different and we can customize a work platform for your specific needs

We have delivered bespoke solutions to numerous companies across different industries, improving their performance. You can see how other companies use a work platform to make daily tasks easier.

Case: Working vertically instead of horizontally

Mobile work platform

You can also add wheels to your work platform, so it becomes a mobile work platform.

This allows you to work at height temporarily, and the operators can get on and off easily. The purpose of the mobile workplatform is to let the operator work at a desired height while making sure that safety is the main priority.

Call us at +44 0870 904 7775 to hear more about your possibilities.

Bespoke work platform

You can customize your work platform with many other smart features such as:

Retractable handrails
Toolbar side platform,
Possibility to connect power and compressed air directly from platform
Stairs to easier to get up and down the platform

Additional you can add other safety accessories such as rubber mat, tear drop plate or non slip paint finish.

Our work platforms can be manufactured in ATEX, Hygienic Design, galvanized steel, stainless steel and painted steel.

See our accessories here

Every work platform is unique

A work platform is a splendid solution when you need your employees to carry out tasks in height and or at floor level as you can also get a work platform to go below ground. They are designed to move easily which makes them a highly sought after as they secure a seamless operation. They can be used in any industry such as the energy, construction, to food warehouses.

Different industries have different needs and we know that every lift is unique. Therefore, we can fit the work platform to your needs. You might need a platform with tear drop plate, rails and gates or other means of making your work platform a safe and productive place to carry out the specific tasks that you need.

Call our experienced sales team at 0870 904 7775 to discuss possibilities and the perfect design for your solution. You can also fill in the contact form with your request and we will get in touch with you.

Contact form

Ease the work and increase efficiency

Lifting tables have been invented to ease physical work for employees, avoid injuries due to overload while increasing efficiency. Here you can read more about back pain, lost working days and ergonomics:

White paper on ergonomics

Service and repair

In addition to our standard 12 month parts and labour warranty we offer 3 after-sales service packages anywhere in the UK.

Spareparts

TRANSLYFT can deliver spareparts to all our lifting tables.

Whether it is a cylinder, oil or wheel that needs to be changed, we have it in stock so we can send it to you quickly. Write to our spare parts mail or contact us at tel. 0870 904 7775

different spareparts for scissor lift tables

Bespoke solutions

Did you not find a product that fit your exact needs? TRANSLYFT are experts in both small and large adjustments of our products so please do not hesitate to give us a call and hear more.

Surface Treatments

TRANSLYFT can manufacture most products in stainless steel, galvanized steel and painted. Read more about the three surface treatments here

Surface treatments